Skip to main content

AIQ Onsite Trial Requirements

AIQ Onsite Trial Requirements

TheUse this checklist when preparing an onsite AIQ trialtrial. is a self contained instance that runs on Windows and has the database installed locally. It is designed for proof of value testing of AIQ.

Trial parameters:

  • Up to four users accessing the Controller from their own browser.
  • One hundred parallel API-level tests.
  • Five to ten parallel UX (GUI) level tests.

Values based on maximum trial configuration recommendation. UX-level test capacity is also impacted by web site's browser memory footprint and CPU load.

Controller

The AIQ Controller is the primary point of communication and information exchange for Appvance IQ.

Windows

  • #5FBC5E or newer
  • 6+ CPU Cores
  • 16+ GB Memory
  • 100 GB SSD
  • Java GraalVM 11 (64-bit)

Installing the Controller on a Windows machine is only supported for AIQ trials. For production level systems, the Controller must be install on Linux.

Test Nodes

Appvance Test Node(s) run on individual machines. Test Nodes are also known as Load Generators. The Controller provides tests for each Test Node to run.

Sizing of the Test Node is dependent on the number of concurrent tests you want to run. The more concurrent tests, the more CPU and memory required. Refer to the Test Node Capacity Load Generator Table below.

  • Windows Server 2022 or newer
  • 6+ CPU Cores
  • 16+ GB Memory
  • 100 GB SSD
  • Java GraalVM 11 (64-bit)

Test Node Capacity Load Generator Table

Estimated capacity per server or VM (varies greatly with application complexity)

Assumes E7 or newer Intel cores or EPYC AMD cores @3Ghz+.

Refer to the table below to determine Test Node capacity and configuration needs:

CPU Cores

Minimum Memory

Minimum

UX-Level Browsers

Max likely

UX-Level Browsers

HAR Protocol Level VU

JMeter Protocol Level tests

4

8 GB

4

8

100

20

6

12 GB

6

12

150

30

8

16 GB

8

16

250

40

12

24 GB

12

24

500

60

16

32 GB

16

32

1000

80

32

64 GB

32

32

2500

160

64

128 GB

32

64

5000

320

128

256 GB

32

64

10000

640

Using the latest Chrome browser, poor linear scalability is experienced after 30 browsers regardless of the size of the test node.

Example System Requirement Calculation

If a test specification requires UX tests to run 1000 virtual users, and each test node has an 8 Core CPU with 12 GB RAM, then 20 test nodes are required.

Calculated as:

  • Test Nodes Required = Total Virtual Users / Virtual Users per Test Node
  • (from the above example) 20 Test Nodes = 1000 Virtual Users / 50 Virtual Users per Test Node

Repository

The Repository can use the local file storage on the Controller or any other supported repository type such as Git or SVN.

Browsers

Browsers accessing Appvance IQ via a browser. AIQ supports the latest versions of the following browsers:

  • Apple Safari
  • Google Chrome
  • Microsoft Edge
  • Mozilla Firefox

AIQ no longer supports the use of Internet Explorer. Contact support@appvance.ai for questions regarding alternate browser versions.

End-User System

  • 6+ CPU Cores (at least Intel® Xeon E5 Class processor)
  • 8+ GB Memory
  • Java GraalVM 11 (included with Appvance IQ end-user setup)

Network Configuration

The end user systems will access AIQ only from a browser. The following ports must not be in use, and must permit internet access.

Port

Description

Requirement

8080 | 8443

HTTP navigation to server

Must permit internet access (not blocked by firewall for outbound traffic)

9090 | 9091

Test Designer client (internally open only)

Must not be in use.

Designer Proxy

End user machines must have permissions to install a proxy in the browser. You must have the Designer Proxy installed before you can begin using AIQ. You will be prompted by AIQ to install the proxy.

  • Test Designer folder (AIQ 4.10.x and earlier)

  • Windows default path: C:\TestDesigner
  • Mac default path: $HOME/TestDesigner

  • Test Designer folder (AIQ 5.0.0+)

  • Windows default path: C:\WebDesigner
  • Mac default path: $HOME/WebDesigner

Security Port Requirements

Following are the list of ports that need to be open in the server that will host Appvance IQ.


These port configurations apply to both the Controller and the Test Nodes.


Port

Description

3306

Port access between AIQ Controller and MySQL service/server (if applicable)

9095 -9100

From end-user computer outbound to AIQ Controller (required only for recording HTTP traffic from end-user computer)

8080

HTTP port. Outbound access from the Controller and between all Test Nodes (Either 8080 or 8443 is required, not both)

8443

HTTPS port. Outbound access from the Controller and between all Test Nodes (Either 8080 or 8443 is required, not both)

9090

Test Designer port, required for internal use within Controller and Test Nodes (not external)

9091

Test Designer port, required for internal use within Controller and Test Nodes (not external)

8090

Security Testing required only within the controller and test nodes (internal to each system only)

8079

Java processes shutdown port required only within the controller and test nodes (internal to each system only)

In addition to these ports, the Database must be enabled to allow incoming connections from Controller (recommended on same box for trials) and Test Node machines.

You may also use our compatibility check utility to determine the readiness of your machines.

Anti-Virus Recommendations

The Appvance IQ installation package is sizable and the vast majority of the contents will never change between installations or upgrades. Because of this, you can exclude the AIQinstallation folder the from the scheduled daily / weekly / monthly scans. Doing so will reduce the time and resources devoted to these scans. Also if these folders are not excluded, you may see some unexpected behavior in AIQ.

For example, this may impact scenario executions, specially on DS and DS3 engines that write many temporary files for requests and responses.

Following are some of the top Anti-virus programs from which the files and folders of Appvance IQenvironments should be excluded:scoped clearly so infrastructure, access, test objectives, and success criteria are agreed before installation.

Trial readiness checklist

  • AVGConfirm Anti-virustrial objectives, target applications, success criteria, and timeline.
  • AvastIdentify Anti-virusrequired Controller, Test Node, database, browser, device, and integration resources.
  • KasperskyValidate Anti-virusnetwork access, DNS, certificates, proxy settings, firewall rules, and service accounts.
  • McAfeePrepare Virustest Scanaccounts, sample data, repositories, and approved evidence-retention expectations.
  • NortonAssign Anti-virus
  • Symanteccustomer Endpointowners protection
  • Windowsfor Defenderinfrastructure, security, application access, and testing decisions.

Validation workflow

  1. Complete readiness checks before install day.
  2. Run login, node connectivity, repository access, and a small scenario smoke test.
  3. Document blockers, assumptions, and follow-up owners before the trial starts.

Last updated: MayOctober 14,10, 20252026

If you have any feedback on this topic, please contact us at documentation@appvance.ai

Back to top