Change the AIQ Test Node Port

Use this procedure only when your deployed AIQ version uses the TestNode Jetty configuration shown below. Confirm the target port is available and permitted by your network and firewall policies before making the change.

1. Stop the AIQ services.

2. Open <appvance_package>\TestNode\etc\jetty.xml in a text editor.

3. Locate <Set name="port"><Property name="jetty.port" default="8080"/></Set>.

4. Replace 8080 with the required port number.

5. Save the file and restart the AIQ services.

6. Verify that the Test Node is reachable on the new port.

Last updated: September 14, 2026

If you have any feedback on this topic, please contact us at documentation@appvance.ai